Step 1- With 4 sheets of 8 1/2" x 11" white cardstock, cut them to 5 1/2"X 4 3/4 pcs and you will need 7 pcs. With 2 12"X12" DSP sheets, cut them into 4 1/2"X 5 1/8" pcs and you will need 6 pcs.
Step 2- With the 12" X 12" solid color Cardstock, cut off a strip that is 1 5/8"(this is crap), On the 12" side make a notch with a pencil at the 6". Now place pc in trimmer and line up the notch and the corner of paper on the cutting blade and cut. Then place the same notch and the other corner on cutting blade then cut. This will make a large triangle.
Step 3- With the 7 white pcs, on the 5 1/2" side make a pencil notch at 2 3/4". Now place notch and corner on cut line of trimmer and as before cut, then the same on the other side- cut from notch to corner. This will make a med size triangle. Do this to all 7 pcs.
-With the 6 DSP pcs, on the 5 1/4" side make a pencil notch at 2 5/8". Place notch and corner on cutting blade and cut. Then repeat on other side. Now you have a sm triangle. Do this to all 6 pcs.
Step 4- With the 7 white pcs, put one of these aside (this will be for the center of the card). Now with the remaining 6 pcs, cut 1 1/2" off of one side, then cut an additional 1/4" off the same side. There will be 3 pcs that you cut the 1/4" sliver is scrap(or trash). Repeat this process for all 6 pcs.
Step 5- With the 6 DSP pcs, cut 1 1/4" off of one side, then cut an additional 1/2" off the same side. The 1/2" pc is scrap. Repeat this process for all 6 pcs.
Step 6- With the Large solid color Triangle, Place any long edge on the left side of score board. At the 5 1/4" core line follow it down and score the paper straight down. Next score at the 7" score line in the same way. Turn the triangle one turn the repeat the 2 score measurements. Then turn a 3rd time and repeat the score measurements.
Step 7- With one of the points of the large triangle pointing toward you, fold up on the highest score line then crease. Then fold the point back (or towards you) on the lowest score line, crease. Repeat for all 3 sides.
Step 8- Glue down all the white panels in each section on both sides of the large triangle. Then Glue the DSP panels on top of each white panel - leaving a border arround all the sides.
Step 9- Stamp a sentiment onto the white triangle that we set aside. Glue to the very center of then card. Decorate with images, sequins, etc.
Step 10- Fold card as shown Or tie with a ribbon or belly band.
This Star was made for the MMI IG DT "Color Challenge"
Wew, I know that's a lot of steps, but it's really easy and a lot of fun. So give it a try and have a great day. ~Trace
Friday, June 22, 2018
Hi Everyone, here is my latest project. DieCut 4th of July Star. I would definitely
try to use stock that is heavier than 65lb. Links are listed below. If you like please subscribe and ring the bell for notifications. I have use Maymay Made It stamp sets and Brutus Monroe Dies "Stars".
If you make the card please share it with me on Fackbook or Instagram. Have a great day~
Hi everyone, my latest video over on YouTube is a Father's Day Card. Above you will find the link to my video and below you find the links to the supplies I used. I hope you give it a try. If you enjoy the video please like, subscribe and ring the bell to follow my content. Thank you all for watching and Happy Father's Day.~Trace
Hi everyone, my latest video is up at Youtube and it is the 2nd Kanzashi fold. I will be doing a new Kanzashi fold once a month. I hope you all enjoy the video, If so please like, and comment and don't forget to ring the bell. If you make it can you please share it on my Facebook or Instagram. Thank you. Have a great day.~Trace
Hi everyone, my latest tutorial is a Tunisian Crochet placemat. In the months to come I will be adding other Tunisian Crochet stitches. So if you like this video please like, share a and ring the bell so you can be notified when I post the follow up videos. If you make the placemat please share it with me on Facebook and/or Instagram. Have a great day and see you next time~ Trace